Automated Graphics insertion

Open Settings menu > Settings >Remote tab.

Select the TitleBox NetCtrl Output line and enable it.

Press the Configure button to set the parameters of the UDP communication and click OK when ready.

Right-click in the playlist and select Add/Insert > Event > TitleBox NetCtrl Output.

The Net Control Wizard will guide you through the command setup.

Several lines will appear in the playlist after clicking on the Finish button.

TIP (!) If you use a few graphics projects, you can create complex events to control them. Thus, the graphics control events will appear as one line in the playlist.

• Related Articles

• Graphics insertion

  TitleBox is the graphics insertion tool in the PlayBox TV automation kit. It can be controlled manually or automatically and provides a huge variety of real-time object-editing options.

• Dynamic graphics insertion

  Use the ShotBox to control single TitleBox objects if TitleBox is running in Net control mode. OR Operate TitleBox manually to start and stop the objects you need. Please, check the TitleBox Interactive operation section

• Automated VTR control

  Open Settings menu > Modules >Remote tab. Select the VTR Control plug-in and enable it. Press Configure to specify the connection COM port and some VTR-specific settings. Click OK to apply. Right-click somewhere on the playlist and select Add/Insert ...

• Can I insert graphics while streaming?

  Yes, it is possible to insert graphics while streaming, but you have to take into consideration the follwoing deficiencies: ·        the host server needs to have sufficient CPU power ·        multi-channel streaming from the same chassis will be low ...

• Airbox Logo Insertion

  In a stand-alone AirBox you can save up to 16 static logo presets and use them later during playback. Set your logos in Settings menu > Logo; Select the desired logo preset (one to sixteen), click Load and browse for the relevant image. Click Open. ...