Batch capturing

Batch capturing

In this mode, CaptureBox controls a VTR to capture the clips defined in a batch-capturing list

NOTE: When the VTR control is performed through the PC COM port (i.e., when you are not using firewire), you will need an RS 232 to 422 converter and a direct cable to connect it.

Go to File menu > RS422 Config… and specify the COM port for communication to the VTR and the command response times valid for this particular device.

Create a batch-capturing list:

Specify the capture-to Folder and the Tape ID;

Enter the In and Out timecode.

The duration will be calculated automatically.

Type a Title and a File name in the relevant fields.

TIP(!) You can lock the title to the filename by pressing the padlock button to the right.

Press Add to List.

TIP(!) You can edit an entry later: select its line in the batch list and press the Edit button.

Press Capture to start capturing the batch.


CaptureBox will notify the operator to change the tapes when necessary.


    • Related Articles

    • Tab-delimited batch-capture lists

      CaptureBox is capable of importing tab delimited text files as batch capture lists. The delimiter can be a tab, a semicolon or a coma symbol. Click the Import button and specify the template to be used during the import. If there is no template in ...

    • Manual Capturing

      Make sure the video source is connected to the hardware encoder inputs. Press the Setup button to specify the encoding format and compression type. Click OK to apply. Specify the capture-to folder and the tape ID and enter Title and File name in the ...

    • Schedule capturing

      In this mode, CaptureBox can control an external switcher to capture incoming feeds in a time-based schedule, according to the PC system clock. Go to the Schedule tab and browse for the capture-to folder. Select a Channel from the drop-down list. If ...

    • Capturing an IP Stream

      Make sure to select the IP Capture plug-in: Press Device select Select one of the IP Capture plug-ins Click OK Press Setup and specify the host address and the port for receiving the stream. Click OK. If the incoming stream is MPEG2 Transport Stream, ...

    • CaptureBox - Quick Start

      Quick Start 1.      Connect the video source signal to CaptureBox video input; 2.     Launch CaptureBox; 3.     Select the media folder you wish to capture to; 4.     Fill in the Tape ID or Channel field; 5.     Type the file name you want to capture ...