CaptureBox - Quick Start

CaptureBox - Quick Start

Quick Start

1.      Connect the video source signal to CaptureBox video input;

2.     Launch CaptureBox;

3.     Select the media folder you wish to capture to;

4.     Fill in the Tape ID or Channel field;

5.     Type the file name you want to capture the content to;

6.     Click on the Manual Capture button;

7.     When required, stop the capturing by pressing the Abort

Congratulations! You have just captured your first CaptureBox clip!


    • Related Articles

    • AirBox - Quick start

      Quick start ·        Verify all connections and start the workstation; ·        Make sure that you have suitable content available in the media folders; ·        If you do not have any available, use the sample clips from the PlayBox CD; ·        ...

    • ListBox - Quick Start

      Quick Start ListBox is dedicated to creating and editing playlists. It allows preparing playlists in advance for the AirBox module and playing them on-air later. ListBox does not need any special workstation or platform. ·        Launch ListBox; ...

    • TitleBox - Quick Start

      Quick Start The TitleBox (TB) module is an on-air graphics manager. You can create different static or dynamic objects in TitleBox, such as rolls, crawls, still pictures, clocks, etc., and save them in projects. The projects could be used directly ...

    • Capturebox Interface Overview

      An overview of the CaptureBox interface

    • How to install CaptureBox?

      1. Navigate to the CaptureBox Pro installation file and double click on it to begin. 2. Depending on your Windows security settings you may or may not be prompted with a message. If you receive this click YES " Do you want to allow the following ...