How to set up my logo on the video in Eurisko?

How to set up my logo on the video in Eurisko?

Upload the logo on Network/Main OSD/2nd OSD setting, configure the image parameters and click "Applyā€¯


    • Related Articles

    • Airbox Logo Insertion

      In a stand-alone AirBox you can save up to 16 static logo presets and use them later during playback. Set your logos in Settings menu > Logo; Select the desired logo preset (one to sixteen), click Load and browse for the relevant image. Click Open. ...
    • How to set up bitrate in Eurisko?

      To set up the output” Bitrate” on the user interface. Then click “Apply”.
    • How to set up display resolution in Eurisko?

      Set up the “encoded size” on the user interface. Then click “Apply”
    • How to set up” IP address” on Eurisko encoder?

      Set up the IP address in  "Network” settings on the user interface. Then click on “Apply” and reboot the device
    • Supported Video Encoders Property Pages

      async_depth - h264_qsv - hevc_qsv - mpeg2_qsv Maximum processing parallelism (from 1 to INT_MAX) (default 4) avbr_accuracy - h264_qsv - hevc_qsv - mpeg2_qsv Accuracy of the AVBR ratecontrol (from 0 to INT_MAX) (default 0) avbr_convergence - h264_qsv ...