In the Network and sharing section of the Control Panel, of the computer set up the default IPv4 address. Then open any browser on the computer and 192.168.1.168 to open the configuration panel of the encoder.
Make sure that the IP address in the Networking Sharing Center of the Control Panel on the computer and IP address in the Network section of the configuration panel of the encoder match.
For Standard definition MPEG 2, 3,75mbps and for HD high 15mbps including audio. But keep in mind that a transport stream by default has no mechanism to recover from packet loss. It needs a wrapper like RTMP, RTSP, SRT, MPEG dash
Make sure you are using the latest version of the software To check if you are using the latest version, click on System/Version info and if necessary System/Upgrade settings Check if the internet speed is fast enough. In general, to stream most ...