Multi Parallel Output

Multi Parallel Output

Multi Parallel Output enables IP streams with different codecs (MPEG2, H.264), resolutions (HD, SD) and transports (UDP, RTP) to be outputted simultaneously. The playout audio can optionally be encoded into Dolby Digital (AC3) and inserted into the output UDP streams.


    • Related Articles

    • Supported output swichers

      External devices like video routers, video switchers, etc. are controlled by AirBox (Pro Option) and the UMC plug-in. Additional external devices not listed below can be also supported upon request. AirBox Output devices supported ·        Nevion (ex ...

    • Can I broadcast live as a second stream output on YouTube?

      If your licence permits, you can create additional output(s) to your  AirBox, you can broadcast directly to YouTube when the output is set to RTMP (only available with recent versions of AirBox).

    • Can I get single IP output from multiple AirBox streaming channels?

      Yes, it could be achieved is to use DVB Muxer. The program will mix individual AirBox UDP outputs as a single stream through a UDP socket.

    • Output compression of AirBox Streamer

      ·        In "IP Pump" mode MPEG2 files are compressed  in their original properties, i.e. bitrate: profile, level, etc. In this mode SD or HD MPEG2 content is produced. ·        In "MPO Stream" mode the generated outputs are MPEG2, H.264/AVC

    • What size pipe do I need to use the transport stream output on an AirBox or CIAB?

      For Standard definition MPEG 2, 3,75mbps and for HD high 15mbps including audio. But keep in mind that a transport stream by default has no mechanism to recover from packet loss. It needs a wrapper like RTMP, RTSP, SRT, MPEG dash