Playback control

Playback control

You can push the playback control buttons to control the playout or use the provided short keys.



The Return button is active only after a Jump operation. Use it to go back to the point in playback before the jump.

Use the
Cue button to pause the playback on the first frame of the currently selected clip.

NOTE: The execution of this command may vary in accordance to the hardware decoder! Please, contact support@playboxtechnology.com for advice.



    • Related Articles

    • Playback Control through DTMF tones

      DTMF tones input on the PC audio card can be used for playback control: Open Settings menu > Modules > Remote tab. Select the DTMF Input plug-in and enable it. Press Configure to specify the audio device for receiving the DTMF tones and the command ...
    • Playback Control through GPI input

      GPI pulses input on the PC COM port(s) can be used for playback control: Open Settings menu > Modules > Remote tab. Select the GPI Input plug-in and enable it. Press Configure to specify the COM port for receiving the GPI pulses and the command to be ...
    • Automated VTR control

      Open Settings menu > Modules >Remote tab. Select the VTR Control plug-in and enable it. Press Configure to specify the connection COM port and some VTR-specific settings. Click OK to apply. Right-click somewhere on the playlist and select Add/Insert ...
    • Playout control buttons

      Use the buttons under the work area to control the entire project NOTE: You have to push the Play button to enable showing the graphics on the screen. To show a currently selected object, use the object control buttons, situated in the toolbar NOTE: ...
    • Remote Playout Control

      Multi Playout Manager is a web server application. It was designed to control multiple AirBox channels from within the same user environment or from a remote location. MPM supports a web-based interface, from which web users can control all AirBox ...