Playout control buttons

Use the buttons under the work area to control the entire project

NOTE: You have to push the Play button to enable showing the graphics on the screen.

To show a currently selected object, use the object control buttons, situated in the toolbar

NOTE: If the currently selected object belongs to a group of several objects, these commands will apply to all objects in the group.

• Related Articles

• Playback control

  You can push the playback control buttons to control the playout or use the provided short keys. The Return button is active only after a Jump operation. Use it to go back to the point in playback before the jump. Use the Cue button to pause the ...

• Remote Playout Control

  Multi Playout Manager is a web server application. It was designed to control multiple AirBox channels from within the same user environment or from a remote location. MPM supports a web-based interface, from which web users can control all AirBox ...

• Playout Redundancy

  Start the BackUp AirBox; Go to Tools menu > Mirror Mode > Configure… and set the backup, according to your needs (enable switcher control, playlist synchronization, create backup group, etc.) TIP(!) To create a group of Backup channels: Type the same ...

• Airbox Playout software

  AirBox provides automated content playout for satellite channels, cable head-ends, over-the-air broadcasters and corporate TV users. It is designed to be extremely robust, in order to meet the highest reliability demands of on-air playout. Due to its ...

• Automated VTR control

  Open Settings menu > Modules >Remote tab. Select the VTR Control plug-in and enable it. Press Configure to specify the connection COM port and some VTR-specific settings. Click OK to apply. Right-click somewhere on the playlist and select Add/Insert ...