CaptureBox
Schedule capturing
In this mode, CaptureBox can control an external switcher to capture incoming feeds in a time-based schedule, according to the PC system clock. Go to the Schedule tab and browse for the capture-to folder. Select a Channel from the drop-down list. If ...
VTR does not react to the commands from CaptureBox control panel
Possible Cause: 1. VTR’s control cable is not commutated. 2. RS-422 / RS-232 converter is not supplied. 3. The VTR is in local control mode (Local indicator is on). Solution: 1. Make sure the control cable is properly connected to both the VTR and ...
CaptureBox - Quick Start
Quick Start 1. Connect the video source signal to CaptureBox video input; 2. Launch CaptureBox; 3. Select the media folder you wish to capture to; 4. Fill in the Tape ID or Channel field; 5. Type the file name you want to capture ...
Capture from tape
How to use CaptureBox to capture video from tape
Capturebox Interface Overview
An overview of the CaptureBox interface
Content Ingest
CaptureBox provides the ingest part of the TV workflow. Depending on your needs, you can combine it with other PlayBox modules to fit best into your specific workflow requirements. Below, you will find a description of the two basic modes of ...
Can I save or restream partial of incoming live list or MPEG transport stream?
Through CaptureBox the incoming programs (UDP) can be filtered and a selection of files can be isolated. Additionally, multiple different selections to be captured as separate destination files.